Product : Hydrogen
Model : RUBY H
Size : 400 X 190 X 380 (W X L X H)mm
Weight : 5 kg
Raw Water Pressure / Temperature :
3.0~3.5Kgf/Cm² / 4~30℃
POWER : AC85~280V/50~60Hz

You can drink the water that you want with just one touch operation.

Platinum-titanium material electrode performs important role that separates purified water into alkaline and acidic water. There is difference on alkaline water quality by the platinum-titanium plating amount and the number of electrode sheets.It is equipped with 7 sheets of platinum-titanium plated electrode for high quality alkaline ionic water generation. Additional advantage of platinum-titanium plated material is that it has high electric conductivity and it is harmless material for human body. It also has low electricity consumption, excellent electrolytic performance, and can implement more accurate pH, ORP along with more electrode plates, and you can drink high quality alkaline ionic water.

ALLSBON's technology ensures safe operation without program error when it changes the number of platinum-titanium electrode between 3~9 sheets.

Classic power supply transformers that are used for general alkaline water ionizer are designed to withstand only with 100-150W/24-30V/5A power supply, and this causes a lot of PCB program error or component malfunction due to overheat in the area where overcurrent can be generated during electrolytic operation.

We eliminate classic transformer type which affects home appliances because of unstable primary power source, and implement SMPS type power supply that can withstand outside 200-350W/24-35V/10-20A range. It lowers overheating rate of the device even with more than 2 times of overcurrent environment than existing devices, and it greatly enhances economic and safety of the device by reducing program error rate.

* Caution) It is especially recommended to use SMPS type because overcurrent increases inside electrolytic vessel at high longitude areas (America, Europe, Southeast Asia, etc.) that causes program error.

18-Stage Filtering System Composite Filter

Cleaning is one of the most important issues with water ionizer. The purpose of ionic water cleaning is to remove scale (Ca, Mg) attached to electrode plate. Alkaline ionic water cannot be generated properly due to decline of electrolytic performance when there is a lot of scale. ALLSBON's alkaline ionizer is equipped with pre-cleaning function as its basic feature, and it also performs cleaning for 15 seconds using more than 50 times of automatic polarity change/second after water discharge as shown in following Figure.

Self diagnostic system using semiconductor circuit informs the cause of error at LCD display window for easy diagnostic and convenient corrective action when normal device operation is unable due to internal/external environment change. Also, it is included with self-protection system that shuts off the current by self diagnostic when malfunction by overcurrent occurs
(ex: function to detect insufficient water flow / water leakage).
Alkaline water pH may be different by the water quality of installed location and generated water volume.
We have established system to generate optimized ionic water at any condition by segmenting the electric current applied to the electrode into 38 fine steps.
The system checks the tap water pressure and input volume to the device in real time, and displays the pH and ORP change at LCD display window so that you can drink optimal ionic water. In addition, it also has feature to change fixed pH and ORP value of 4-level alkaline water & 2-level acidic water.
It informs filter change time by text and voice which eliminates specific management.
- Filter lifespan can be different according to the water quality of each country.
- It can generate clean and clear optimal ionic water by adding system function to change filter lifespan according to the tap water quality status.

One of the factors that decide electrolytic vessel's life span and performance is scale generation. ALLSBON added new concept of “Cleaning by Automatic Water Flow Switching” feature in addition to basic automatic cleaning (see above) to keep product life and performance just like new one. Other general alkaline ionizers are fixed wired to + and - polarity electrodes, and it causes more scale. “Cleaning by Automatic Water Flow Switching” feature is a new concept cleaning technology that is designed to switch + and - electrode polarity after every 20 liter of alkaline ionic water discharge at water outlet to prevent scale on electrodes. You can enhance the quality of alkaline ionic water and improve the durability of water ionizer one level higher by using this “Cleaning by Automatic Water Flow Switching” feature.

When water is being discharged, alkali ion water leverages the electrolytic cell, ionized water is discharged which ensures that you can drink the ion water that is safe from all types of bacteria, but more upgraded UV sterilization system is adopted, paying attention to the safety

Model name : DION RUBY H(Hydrogen water)
Product Size


Water supply type Direct supply type
Weight 5 Kg
Suitable water
3.0~3.5Kgf/Cm², 4~30℃
Rated power AC85~280V/50~60Hz
Concentration of
enriched Water
prevention function
PCB error happened
by Overcurrent
DCV 30V/450W, maintain until 15A

Indication type

LCD display

Button type

Touch type
(SMPS type)
Purified water Step 1
Hydrogen water Step 1
Concentration of
enriched water
1.2 PPM
(Decreases to 0.5~0.8PPM when more than 2 liters flow out)
Generation capacity 2.5 Liter/Min
Water supply type Automatic solenoid-type control
Operation type Flow meter pulse signal operation type
(more than 16 pulses)
Water supply type Automatic solenoid-type control
Filter 1st filter SEDI + Pre-carbon Effective amount of water purification 6 months(3,600ℓ)

2nd filter

SEDI + Pre-carbon + Post-carbon + ultra fiber 12 months(7,200ℓ)
When 10ℓ of water is provided a day
Filter exchange time & Filter reset function Exchange the filter when filter exchange icon is turned on .9999(LCD) or voice comment is generated / Cartridge method(built-in filter)
Press 5 seconds the changed filter button when it is in ready state to reset
Amount of Filter use As a flow sensor accumulation type, amount of use is displayed on. the LCD screen.
Electrolyzer Type Plate
Number of electrode plates 7 plates , 9 plates, 11plates (possible to add electrode plates for alkaline water)
Water outgoing type Dedicated water outlet